Description
Total Alkalinity reducer and PH minus granules are an essential solution for maintaining the perfect pH balance in your pool or hot tub. Keeping the pH level between 7.2 – 7.6 is crucial for ensuring bather comfort, maximizing the efficiency of other chemicals, and safeguarding your pool equipment.
When you notice that the TA is too high or the pH of your pool water exceeds 7.6, it’s time to reach for the Total Alkalinity reducer and pH minus granules to bring it back to the optimal range. By doing so, you not only improve the overall water quality but also create a more enjoyable swimming experience for you and your guests.
Applying the Total Alkalinity reducer and PH minus granules is a simple process that yields significant results. To begin, pre-dissolve the granules in a clean plastic container using a maximum rate of 100g of product per 10 Liters of warm water. Thoroughly mix the solution to ensure complete dissolution before adding it to the pool while the pump is running, preferably close to the water inlets for even distribution.
After allowing at least 8 hours for the treatment to take effect, recheck the pH level. If necessary, repeat the process until you achieve the desired pH balance. Depending on the initial condition of your pool water, multiple treatments may be required, but the results will be well worth the effort.
The dosing rates for the Total Alkalinity reducer and PH minus granules vary based on the volume of water in your pool or hot tub. For a hot tub containing 1,000 liters (220 gallons) of water, add 10g of granules. In a small pool with 40,000 liters (8,800 gallons) of water, use 450g of granules, and in a medium pool with 60,000 liters (13,200 gallons) of water, opt for 650g of granules for effective pH adjustment.
By utilizing Total Alkalinity reducer and PH minus granules, you are not only maintaining the chemical balance of your pool water but also prolonging the lifespan of your pool equipment. With each treatment, you are taking a proactive step towards creating a safe and enjoyable swimming environment for yourself and your loved ones.
Ensure that your pool or hot tub is always ready for use by keeping the pH levels in check with the help of these convenient and effective granules. Say goodbye to fluctuating pH levels and hello to crystal-clear, perfectly balanced water that invites you to dive in and relax without any worries.
Manufacturers description:
Total Alkalinity reducer and PH minus granules enables you to decrease total alkalinity and the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Test the pH of your pool water if it is above 7.6, use pH minus to lower it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water ? add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
Daz Bob (verified owner) –
Working as expected